Crank Angle Detector
Discontinued Products
CP-5900
The crank angle detection system consists of a crank angle sensor, a slotted disc, and a power supply box with a built-in amplifier. By simply attaching the slotted disc and crank angle sensor to the end of the engine's crankshaft, the rotation angle of the crankshaft can be detected accurately and with high responsiveness in engine performance tests and other applications.
It can be used as a timing signal for acquiring combustion pressure data within the cylinder in combustion analysis, and as an angle signal for measuring and controlling ignition timing.
We have prepared two types of pulses: one for TDC (Top Dead Center) detection (1 P/R) and crankshaft 360 P/R, and another for TDC (Top Dead Center) detection (1 P/R) and crankshaft 720 P/R.
| Model name | PP-932 | PP-933 | ||||||||||||||||||
| Exterior |  |
 |
||||||||||||||||||
| Number of output pulses | 360 P/R and 1 P/R | 720 P/R and 1 P/R | ||||||||||||||||||
| Suitable slit disc | PP-010A | PP-011B | ||||||||||||||||||
| Response frequency | DC to 80 kHz | DC to 80 kHz | ||||||||||||||||||
| Rotation Speed Range | 0–6,000 r/min | 0–6,000 r/min | ||||||||||||||||||
| Output signal voltage | “Hi”+4.5V or more, “Lo”+0.2V or less | “Hi”+4.5V or more, “Lo”+0.2V or less | ||||||||||||||||||
| Load resistance | 470 Ω or more at DC 5 V, 2.2 kΩ or more at DC 12 V | |||||||||||||||||||
| Weight | Approximately 250g | |||||||||||||||||||
| Output connector | R03-PB-8M | |||||||||||||||||||
| PIN number |
|
|||||||||||||||||||
| Operating temperature range | 0～+65℃ | |||||||||||||||||||
| Storage temperature range | -10～+70℃ | |||||||||||||||||||
| Power supply | DC +4.75 to 5.25 V, 60 mA, DC +11.4 to 12.6 V, 60 mA | |||||||||||||||||||
| Outline drawings |  |
|||||||||||||||||||
| price | ||||||||||||||||||||
| Input Impedance | 1KΩ or more |
| Response frequency | DC to 80 kHz (360 P/R) DC to 80 kHz (720 P/R) |
| Output voltage signal | “Hi”+4.5V or more, “Lo”+0.2V or less |
| Output circuit |  |
| Power source for emitter and receiver | DC +12 V, 100 mA |
| Load resistance | 10KΩ or more |
| Input/Output signal transmission time | Less than 4 μs (at 80 kHz) |
| Withstand voltage | AC 1500 V, 1 minute |
| Insulation resistance | 10 MΩ or higher (measured with a DC 500 V megger) |
| Weight | Approximately 1.2 kg |
| Operating temperature range | 0～+40℃ |
| Storage temperature range | -10～+70℃ |
| Power supply | AC 100V to 240V, 50/60Hz, 6VA |
| Outline drawings | 200 (W) × 100 (H) × 135 (D) mm (excluding protrusions) |
| price |