Magneto-Electric Rotation Detector MP-9810/MP-9830
Magneto-Electric Rotation Detector MP-9810/MP-9830 FAQ
- Operating principle of the MP-9810 / MP-9830 Magneto-Electric Rotation Detector
- Why does the duty cycle of the MP-9810/MP-9830 Magneto-Electric Rotation Detector change?
- MP-9810 / MP-9830 Mounting Method
- Regarding the output cable for the MP-9810 / MP-9830
- To split the signal of the MP-9810 / MP-9830
- The relationship between the shape of the detection gear and the output signal waveform is
- What precautions should be taken when installing multiple MP-9810/MP-9830 units? (Question supplement) Four MP-9810/MP-9830 units were installed in a row on one gear. The fixing jig is made of SUS400 series stainless steel. The two outer units work even with a gap of 1 mm or more from the gear, but the two inner units do not work with a 1 mm gap, and only work with a 0.8 mm gap. Why?
- Is it possible to replace the MP-981/9820 with the MP-9810/9830? What are the differences between the MP-981/9820 and the MP-9830?