Thickness gauges and displacement gauges CL/VT/VE series
FAQ
- What are the advantages of using the VE series gap detector?
- Can the VE series gap detector measure composite materials? (In the case of insulators)
- How do capacitive thickness gauges and displacement gauges measure the displacement of conductors and semiconductors?
- How do capacitive thickness gauges and displacement gauges measure the thickness of conductors and semiconductors?
- How do capacitive thickness gauges and displacement gauges measure the thickness of an insulator?
- Why is calibration using a reference sample necessary when measuring the thickness of conductors and semiconductors with a capacitive thickness gauge or displacement gauge?
- I want to measure to the very edge of the object using the VE series gap detector, but how far can it measure?
- To what extent do the perpendicularity of the VE series gap detector and the object being measured need to be aligned?
- I want to measure shaft runout with the VE series gap detector, but the measurement surface is naturally curved. How much will this affect the measurement accuracy?
- I would like to extend the cable between the VE series gap detector and the CL-5610 thickness gauge. Is this possible?
- How often are the measurements from capacitive thickness gauges and displacement gauges updated?
- What can the VE series gap detector measure?
- How reproducible are the measurements obtained using capacitive thickness gauges and displacement gauges?
- I've damaged the gap detector in my VE series. Can I purchase just the gap detector and replace it to continue using the device?
- Can I swap out and use multiple VE series gap detectors?
- Please tell me about the linearity specifications of capacitive thickness gauges and displacement gauges.
- Regarding the effects of changes in ambient temperature on VE series gap detectors.
- What range does the VE series gap detector measure?
- What materials can the VE series gap detector measure?
- Can the VE series gap detector measure composite materials? (In the case of conductors)
- Please explain the measurement principle of capacitive thickness gauges and displacement gauges.
- Please explain the principle of measuring the thickness of an insulator using the CL-5610 capacitive thickness gauge.
- パソコンとRS-232Cで接続したいのですが通信がうまくいきません