Rotary Meter Related TM/HT/SE/GE Series
FT-2500 Advanced Tachometer
FT-7200 Advanced Tachometer
HT Series Handheld Tachometer
- Measurement range of HT-3200
- I am using the HT-4200 to measure the rotation speed, but the actual measured value is about twice the specified rotation speed. I would like to know how to resolve this issue.
- How do you set the full scale of the analog output to 600.0 r/min when measuring rotational speed (Lo range) with a resolution of 0.1 r/min on the HT-5500?
- How do you set the full scale of the analog output to 400.0 m/min when measuring peripheral speed (resolution 0.1 m/min) with the HT-5500?
- HT-5500 contact and non-contact handheld tachometer: "Although the circumferential speed ring cannot be applied, the rotation axis is accessible and the diameter of the rotating body is known. Can the circumferential speed be calculated from the rotational speed?"
- Using the HT-5500 contact adapter, but cannot measure (Precautions when using the HT-5500 contact adapter)
- I replaced the battery with a new one, but the display remains at 0.
- It is also possible to use small reflective marks for measurement (Applicable models: HT-4100/HT-5100/HT-5200/HT-5500, LG-9/LG-930, FG-1300, PP-940).
- Features, temperature range, and purchasing methods of the reflective mark (HT-011) for the following models: HT-4100/HT-4200/HT-5100/HT-5200/HT-5500, LG-9/LG-930/LG-9200, FG-1200/FG-1300, PP-940.
- HT-5500 contact and non-contact handheld tachometer: "Although the circumferential speed ring cannot be applied, the rotation axis is accessible and the diameter of the rotating body is known. Can the circumferential speed be calculated from the rotational speed?"
SE/GE Series Engine Tachometer
TM-2000 series tachometer (discontinued)
TM-3100 series tachometer
- Please compare the measurement accuracy of TM-3100 and HT-5500.
- Currently using LG-9200/TM-3130. Measuring by attaching 25 small reflective stickers to a rotating body with a diameter of 60 mm. I would like to know the possible causes and solutions for the following issues. I am monitoring the analog output (0-10 V) waveform from the TM on a memory high recorder. The pulse count shows a waveform output at regular intervals, but the entire analog output waveform fluctuates up and down (with variations in amplitude).