CF-5200 Other Questions (Discontinued Product)
FAQ
- How much data can be stored if the CMOS memory is expanded?
- I would like to find books and materials on impulse hammer measurement.
- Is it possible to input the unit of acceleration (m/s²)?
- The auto-recall function
- I want to measure the maximum rotation speed of an inverter motor when voltage is applied for just one second, but I don't know how. Since the method isn't available, I'm measuring the fundamental period of a vibration sensor to observe the steady-state rotation.
- Is it possible to repeat the cycle of waiting for a trigger, acquiring data, storing it in memory, and then waiting for a trigger again?
- How to prevent search point markers from being recorded in the data?
- How to check the contents of the condition memory
- The meaning of the text "re -ha" at the bottom of the screen is
- Although the Japanese display software option is installed, the initial screen displays in English.
- I want to take repeated measurements using an interval timer.
- I want to measure the period variation of 100 pulses at a frequency of 1 Hz. Is there a good way to do this?
- The specifications for RGB OUT are
- I selected +/- for polarity selection with an external trigger, but only + is applied. Hysteresis is set to 10%.
- I want to measure the vibration, runout, and noise of a rotating body (spindle). What kind of equipment configuration should I prepare?
- (1) What is the difference between the CF5220SV and the non-SV version? (2) I want to display the Nyquist transfer function on the CF5220, but it's not mentioned in the catalog. Is this only possible with the SV version?
- The difference between AC and DC coupling is
- A 2Hz vibration component changes in amplitude from 1 to 5. We want to measure it in a way that discriminates between amplitude 1 and amplitude 5.
- What is the difference between FFT and spectrum analyzer?
- (1) Is it possible to input control contacts from an external source? (2) Is it possible to add a comparison function?
- What are the differences in specifications between the CF5210 and CF360ZA?
- Is the optional keyboard the same as the one for the PC?
- We applied an EXP window and calculated the attenuation rate using curve fitting, but has the window been corrected?
- I'd like to inspect it, but what is the accuracy like?
- What is the conversion adapter mentioned in the catalog?
- What color video printer should I choose?
- The difference from the CF350 is
- Are there any software programs that are equivalent to WS5130?
- I want to perform jittermeter analysis (rotation, frequency fluctuations).
- (1) The standard for dB is (2) The standard value for sound pressure is
- The selection of a data recorder for recording data in the transmission measurement and analysis of structural materials is
- Is it possible to generate force and acceleration data in a specific frequency band through impact testing?
- We want to determine the frequency response function from the sound source and the sound at the measurement point, and then predict the sound at the measurement point, including phase information, when the sound source is changed (the sound source is an FFT signal output + speaker).
- Do you have a measuring cart?
- What are the differences in specifications between the CF5200 and the DS series, and what are the advantages of the DS series?
- I want to input the digital signal after A/D conversion into a CF card and perform frequency analysis.
- How to analyze by cutting out low-frequency components?