We are pleased to announce the addition of a new TEDS-compatible, compact, lightweight, and highly sensitive 3-axis Accelerometer to our lineup. This sensor achieves miniaturization, lightness, and high sensitivity with a volume 1/3, mass 1/2, and sensitivity of 10 mV/(m/s²) compared to conventional models.
Accelerometer are the most commonly used sensors in vibration testing for performance evaluation of various products. For example, in the automotive industry, efforts are underway to improve fuel efficiency and electrify vehicles in order to achieve carbon neutrality by 2050. In particular, improving fuel and energy efficiency requires vehicle weight reduction, which in turn is leading to the miniaturization and weight reduction of in-vehicle equipment. Furthermore, the electrification of automobiles has led to quieter cabins, creating new noise and vibration problems where even small sounds and vibrations that were previously unnoticeable become a source of discomfort. As the objects to be measured become smaller and lighter, and the measurement of minute vibrations is required, there is a demand for smaller, lighter, and more sensitive sensors.
The NP-3564N10 meets this need, achieving even greater compactness, lightness, and sensitivity compared to conventional products. By combining our DS-5000 series Sound and Vibration Analysis System with the NP-3564N10, it is possible to measure even minute vibrations.
-
TEDS-compatible compact 3-axis Accelerometer NP-3564N10
Features
- Compared to conventional products, the volume is approximately 1/3 (10 mm x 10 mm x 10 mm), the weight is halved, and it can be installed on small and lightweight objects.
- With a high-sensitivity design of 10 mV/(m/ s²), it can detect minute vibrations.
- Improved work efficiency and prevention of errors during unit calibration through the TEDS function.
- CE marking obtained
Examples of measurement applications
- Simultaneous multi-point measurement such as operational analysis and experimental modal analysis.
- Performance evaluation testing of compact, lightweight, low-vibration, and low-noise products.
Product overview
| specification |
Weight | 4.4g |
| Size | 10 mm (H) x 10 mm (L) x 10 mm (W) | |
| Sensitivity | 10 mV / (m/ s²) | |
| Frequency range (±5%) | 2 to 10,000 Hz(Z), 2 to 7,000 Hz(X,Y) |
