- Calculation and display of signals from two rotating bodies.
- Independent coefficient correction functions for each channel allow conversion to arbitrary physical quantities proportional to the rotational speed.
- Built-in comparator function with two upper and lower limits.
- The 2-channel calculation function displays rotational difference, rotational ratio, reduction ratio, draw, rate of change, <(BA)/A>, and rotational direction.
- Capable of measuring rotational speeds over a wide range from low to high (input frequency: 0.6 mHz to 100 kHz)
The TM-5100 multi-function Digital Tachometer is a 2-channel Digital Tachometer that receives independent rotation signals from two rotating bodies and calculates and displays their respective rotation speeds, rotation ratios, and rotation differences. Each channel's input signal can be arbitrarily set from 0.0001 to 99.9999 times using an independent coefficient correction function, allowing conversion to any physical quantity proportional to the rotation speed, in addition to the rotation speed, depending on the measurement target and application. This allows for a wide range of applications in manufacturing line measurement, such as measuring line speed ratios and speed differences, or reduction ratio (elongation), draw (tensile strength), and slip ratio in rolling processes for steel plates, paper, aluminum, etc. Furthermore, the built-in comparator function with independent upper and lower limits for each channel allows for monitoring and control of rotating bodies. Depending on the application and operating environment, it can be combined with our extensive range of electromagnetic and Magneto-Electric Rotation Detector, photoelectric detectors, and rotary encoders to construct an optimal measurement and control system.
