Please update according to the procedure. Updating with incorrect procedure may cause failure or malfunction of the sound level meter.
Be sure to supply the power from an AC adapter when updating.
Do not perform the following operations while updating as it may cause failure or malfunction of the sound level meter. --Removing and inserting SD card --Disconnection of the sound level meter from the power source
Back up the necessary conditions before updating. The conditions may be initialized due to firmware update.
You may use functionality equivalent to the full version. Please use this when considering the introduction of the VW-0360. (There are restrictions on the number of data registration,.)
LAN terminal 1000base-Tfor Portable Vibration Meter USB Type-A for USB key
OS
Microsoft® Windows® 10 Pro (64 bit) Microsoft® Windows® 11 Pro (64 bit)
Mandatory software
.NET 8.0 Desktop Runtime Included in the VW-0360 installer
CPU
Intel® CoreTM processor (Intel® CoreTM i5 and 8th Generation or later generation)
4 cores and 8 threads or more, and 1.6 GHz or more base clock
Memory
Minimum 8 GB
Disk capacity
512 GB or more (for storing 4,000 days of data)
Display resolution
Minimum 1920 x 1080
Attention
The compatibility with all commercially available personal computers cannot be guaranteed. Even when a personal computer meets the conditions for the operation environment, this system may not operate normally due to the physical shape or influence of other software installed or peripheral devices.
The Hardware will not operate normally, if you start the OS (operating system) on the OS that is not specified by Ono Sokki using the compatibility mode, Microsoft® Virtual PC, etc.
VW-0360 Vibration Diagnosis Assist Tool Full version
This is a full version of the Vibration Diagnosis Assist Tool. The software requires a dongle key inserted into the USB port to operate.
